Magnetic Lock and Hotel Lock Systems

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Magnetic & Hotel Lock

"An electromagnetic lock, magnetic lock, or maglock is a locking device that consists of an electromagnet and an armature plate.
There are two main types of electric locking devices. Locking devices can be either "fail safe" or "fail secure". A fail-secure locking device
remains locked when power is lost. Fail-safe locking devices are unlocked when de-energized. Direct pull electromagnetic locks are
inherently fail-safe. Typically the electromagnet portion of the lock is attached to the door frame and a mating armature plate is attached to
 the door.

The two components are in contact when the door is closed. When the electromagnet is energized, a current passing through the
 electromagnet creates a magnetic flux that causes the armature plate to attract to the electromagnet, creating a locking action. Because the
mating area of the electromagnet and armature is relatively large, the force created by the magnetic flux is strong enough to keep the door
locked even under stress. Typical single door electromagnetic locks are offered in both 600 lbs. and 1200 lbs. dynamic holding force
capacities. A "fail safe" magnetic lock requires power to remain locked and typically not suitable for high security applications because it is
possible to disable the lock by disrupting the power supply. Despite this, by adding a magnetic bond sensor to the lock and by using a
power supply that includes a battery backup capability, some specialized higher security applications can be implemented.

Electromagnetic locks are well suited for use on emergency exit doors that have fire safety applications because they have no moving parts
that are less likely to fail than other types of electric locks, like electric strikes. The strength of today's magnetic locks compares well with
that of conventional door locks and they cost less than conventional light bulbs to operate. There are additional pieces of release hardware
installed in a typical electromagnetic locking system. Since electromagnetic locks do not interact with levers or door knobs on a door,
typically a separate release button that cuts the lock power supply is mounted near the door. This button usually has a timer that, once the
button is pressed, keeps the lock unlocked for either 15 or 30 seconds in accordance with NFPA fire codes. Additionally a second release is
required by fire code. Either a motion sensor or crash bar with internal switch is used to unlock to door on the egress side of the door
automatically."

SINGLE DOOR MAGNETIC LOCK EM 600 LED

Features Voltage Input : 12 VDC / 24 VDC Current Draw : 12V / 500mA ; 24V / 250mA (±5%) Holding Force : Up to 600 lbs (272 kg) Hall Effect Contact : SPDT rated 2A at 24 VDC Anti-Rust Surface Treatment : Blue Zinc Plating Operating Temperature : 0~55° C ( 32~131° F) Operating

DOUBLE DOOR MAGNETIC LOCK 600D-LED

Features Voltage Input : 12 VDC / 24 VDC (per Magnet) Current Draw : 12V / 500mA ; 24V / 250mA (±5%) Holding Force : Up to 600 lbs x2 (272 kg x2) Hall Effect Contact : SPDT rated 2A at 24 VDC Anti-Rust Surface Treatment : Blue Zinc Plating Operating Temperature : 0~55° C

HOTEL DOOR LOCK LH 5000

The intelligent hotel lock system offers standalone solution to meet hotel’s demand on security and management, which features 13.56MHz Mifare card technology and hotel management software. The style and color of lock fit any type of hotel. With the hotel management software, hotels can perform essential management tasks quickly and easily with minimal training. The

SWITCH DEB-33SS

Features Material : Stainless Steel Grade 304 Standard Structure : Stainless Steel Plate/Button Current Rating : 4Amp@125VAC ; 2Amp@250VAC Weight : 90.0 g Dimensions : (L)85 x (W)85 x (T)35 mm